Publications
Musculoskeletal Biomechanics
- Wilson S, Hausselle J, Guess TM, Gonzalez RV (2019). Rigid-body modeling of knee cartilage and meniscus using experimental pressure-strain curves. Computer Methods in Biomechanics and Biomedical Engineering, DOI: 10.1080/10255842.2019.1569639.
- Hale R, Green J, Hausselle, J, Gonzalez RV (2018). Quantified In-Vitro tibiofemoral contact during a bodyweight back squat. Journal of Biomechanics 79 (2018) 21-30.
- Green J, Hale R, Hausselle J, Gonzalez RV.(2017) A Reconfigurable Multiplanar in vitro Simulator for Real-time Absolute Motion with External and Musculotendon Forces. ASME. J Biomech Eng. 139 (2017) 1-11: doi:10.1115/1.4037853.
- Hale, R., Hausselle, J.G. and Gonzalez, R.V. (2014) A preliminary study on the differences in male and female muscle force distribution patterns during squatting and lunging maneuvers. Computers in Biology and Medicine, 52: 57-65
- Manal, K., Green, J., Gonzalez, R.V. (2018) Anatomical Model Evaluation Using In-Vitro Squat Simulation. 42nd Annual American Society of Biomechanics Conference, Rochester, MN, August, 2018.
- Hale, R., Hausselle, J., Dorgo, S., & Gonzalez, R.V. (2016) Validation of an Error Sonification Auditory Feedback Training Program., 40th Annual American Society of Biomechanics Annual Conference, Raleigh, NC, August, 2016.
- Hale, R., Hausselle, J., Gonzalez, R.V., & Dorgo, S. (2016) Effect Of Center Of Pressure On Sagittal Plane Form At Maximum Depth Of A Bodyweight And Weighted Back Squats., 9th Annual NSCA National Conference, New Orleans, LA, July, 2016.
- Green, J., Power, P., Hausselle, J., Gonzalez, R.V. (2015) Performance of A Versatile In Vitro Joint Simulator with Kinetic Chain Testing Capabilities. 39th Annual Meeting of the American Society of Biomechanics, Columbus, OH, USA, August, 2015.
- Wilson, S., Hausselle, J., Guess, T.M., Gonzalez, R.V. (2015) Multibody Dynamic Modeling of the Knee Joint –Effect of Meniscus Degeneration on Tibial Pressure Distribution. 39th Annual Meeting of the American Society of Biomechanics, Colombus, OH, USA, August, 2015.
- Hale, R., Hausselle, J., Dorgo, S., Gonzalez, R.V. (2015) Effect of Error Sonification Auditory Feedback Training on Knee Kinematics and Kinetics during Highly Dynamic Plyometric Maneuvers. 39th Annual Meeting of the American Society of Biomechanics, Colombus, OH, USA, August, 2015.
- Wilson, S., Hausselle, J., Guess, T.M., Gonzalez, R.V. (2015). Improved Contact and Meniscus Properties in Multibody Dynamics Modeling of the Knee. 25th Congress of the International Society of Biomechanics, Glasgow, UK, July, 2015.
- Hausselle, J., and Gonzalez, R.V. (2015) Multi-Joint Modeling: Effect of Knee Muscle Imbalance on Sacroiliac Joint Stress Levels during the Stance Phase of Gait. 25th Congress of the International Society of Biomechanics, Glasgow, UK, July, 2015
- Green, J., Power, P., Hausselle, J., Gonzalez, R.V. (2015) A Versatile In Vitro Joint Simulator with Kinetic Chain Testing Capabilities. 37th Annual South Central American Society of Biomechanics Conference, Forth Worth, TX, USA, March, 2015.
- Hausselle, J., Green, J., Power, P., Gonzalez, R.V. (2014). A Novel In Vitro Joint Load Simulator To Study Joint and Orthopedic Device Behaviors During Highly Dynamic Motions. 7th World Congress of Biomechanics, Boston, USA, July, 2014.
- Hale, R., Gonzalez, R.V. (2014). Differences in Muscle Force Distribution Patterns During Squatting and Lunging Maneuvers Between Genders. 7th World Congress of Biomechanics, Boston, USA, July, 2014.
- Wilson, S., Hausselle, J., Guess, T.M., Gonzalez, R.V. (2014). Improved Multibody Modeling of Human Knee Meniscus. 7th World Congress of Biomechanics, Boston, USA, July, 2014.
- Hale, R., deBock, M., Gonzalez, R.V. (2013) Estimation of Individual Muscles Forces During Squatting and Lunging and Their Load Effect on the Tibial Plateau, 37th Annual American Society of Biomechanics Annual Conference, Omaha, NE, Sep, 2013 Presidential Award.
- Hale, R., and Gonzalez, R.V. (2013) Tibiofemoral Intersegment Force Due to Time-varying muscle loads in vitro and computational simulations, 35th Annual South-central American Society of Biomechanics Annual Conference, Dallas, TX, April, 2013 Best Presentation Award.
- Wilkins, S; Green, J; Hale, R; Gonzalez, R. (2015) Designing and Refining a New Cadaveric Mounting Process for the UTEP Joint Load Simulator. COURI Symposium Abstracts, Summer 2015, ID= 638
- Wilkins, S; Gonzalez, R; Green, J; Power, P. (2015) Refining the research methodology of the UTEP Joint Load Simulator through mechanical design. COURI Symposium Abstracts, Spring 2015, ID= 461
- Wilkins, S; Green, J; Gonzalez, R. (2014) Building the UTEP Joint simulator through the use of SolidWorks. COURI Symposium Abstracts, Summer 2014, ID= 551
Local Composition Control in Additive Manufacturing
- Green J, Slager J, Lopez M, Chanoi Z, Stewart C, Gonzalez RV. Local control of mechanical properties through multi-material blending in fused filament fabrication with an active-mixing hotend. Additive Manufacturing
- Gonzalez, Roger V., and Joshua T. Green. "Hotend for additive manufacturing with an actuated rod in a heated chamber." U.S. Patent Application No. 16/421,273.
- Mendivil, S., Slager, J., Green, J. (2021) Impact of selective laser sintering print parameters on multi-material/fiber parts. COURI Symposium Abstract, Summer 2021
- Melendez, A., Slager, J., Gonzalez, R. (2021) A Software development for petal infill with varying geometry and composition Part 1: Hardware and Firmware Upgrades. COURI Symposium Abstract, Summer 2021
- Rybak, I., Slager, J., Gonzalez, R. (2021) Thermoplastics and composites with radial and circumferential composition gradients. COURI Symposium Abstract, Summer 2021
- Tinajero, C., Slager, J., Green, J. (2021) Testing and characterizing polylactic acid-hydroxyapatite composite filament for 3D Printing. COURI Symposium Abstract, Summer 2021
- Loya, E., Green, J. (2021) Hotend Design and Development for High-temperature 3D-Printing. COURI Symposium Abstract, Spring 2021
- Sanchez, B., Gonzalez, R., (2020) Optimization of single-screw extrusion configurations and parameters to improve filament quality. COURI Symposium Abstract, Spring 2021
- Loya, Eric, Green, Joshua. (2020) Hotend Design and Development for High-temperature 3D-Printing. COURI Symposium Abstract, Summer 2020 Best Presentation in Engineering, Computation and Applied Sciences
- Chanoi, Z., Slager, J. Green, J. (2020) Filament Fabrication of Composite Materials: Viability of Selective Laser sintering for High Percent Hydroxyapatite Composite Fabrication. COURI Symposium Abstract, Summer 2020, ID= 48
- Chanoi, Z., Lopez, M., Slager, J. Green, J. (2020) Filament Fabrication of Composite Materials: Developing Polyetheretherketone-Hydroxyapatite Filament for 3D Printing of Orthopedic Implants. COURI Symposium Abstract, Spring 2020, ID= 16 Best Presentation in Engineering, Computation and Applied Sciences
- Chanoi, Z; Green, J. (2019) Filament fabrication of composite materials. COURI Symposium Abstract, Summer 2019, ID= 66
- Lopez, V ; Green, J; Gonzalez, R. (2016) Variable Composition Control in 3D Printing. COURI Symposium Abstracts, Summer 2016, ID= 904
Biomedical Devices
- Green J, Slager J, Lopez M, Chanoi Z, Stewart C, Gonzalez RV (Submitted). Synthetic tissue development using local composition control to biomimic functional gradients and simulate physiological load response: Comparison to an in vitro cadaveric study. Additive Manufacturing
- Vasquez, K., Slager, J., Green, J. (2021) Thermoforming sockets for amputees using 3D-printed sheets of thermoplastics. COURI Symposium Abstract, Summer 2021 Honorable Mention in Engineering, Computation and Applied Sciences
LIMBS International Research
- Bowen, J. Adjustable Dynamic Response Prosthetic Foot. 1st Annual LIMBS Summit, 2013.
- Cantu, C. Low-Cost Prosthetic Foot Designed for Developing Countries. 1st Annual LIMBS Summit, 2013.
- Mayorga, D., Nunez, O., Valdes, S., Vazquez, A. Transradial Prosthesis for Children in Third World Nations. 1st Annual LIMBS Summit, 2013.
- Paquian, G., Martinez, G., Mejia, R., Grisanti, R., Serrano, J. Low-Cost Mechanical Prosthetic Arm. 1st Annual LIMBS Summit, 2013.
- Natera, D., Nystrom, A., Gonzalez, R.V. Developing a Prosthetic Device to Facilitate Mobility in the Developing World. COURI Spring Symposium, 2014.
- Alcantara, A., Chaidez, M., Chowdhury, A., Rodarte, C., Salcedo, P., Sandoval, S. Low-Cost Prosthetic Arm. 2nd Annual LIMBS Summit, 2014.
- Cantu, C. Development and Testing of a Low-Cost Fiberglass Prosthetic Foot Designed for Developing Countries. 2nd Annual LIMBS Summit, 2014.
- Duenas, V., Gonzalez, R., Nystrom, A. Mechanical Foot Testing Protocol. 2nd Annual LIMBS Summit, 2014.
- Morton, P., Boehler, R., Haynes, C., Martinez, E., Rios, A., Nystrom, A., Gonzalez, R.V. Low-Cost Prosthetic Polymer Foot Design and Prototype Testing Results. 2nd Annual LIMBS Summit, 2014.
- Natera, D. Developing A Prosthetic Ankle to Facilitate Mobility in The Developing World. 2nd Annual LIMBS Summit, 2014.
- Chaparro, D., Gonzalez R.V., Nystrom A. Cosmetic Covering and Mechanical Testing Protocol for Lower Limb Prostheses in the Developing World. COURI Spring Symposium, 2015.
- Duenas, V., Nystrom, A., Gonzalez, R.V. improvement of Prosthetic Foot Design by Developing a Mechanical Testing Protocol. COURI Spring Symposium, 2015.
- Chaparro, D., Gonzalez R.V., Nystrom A. Development of a Low-Cost Energy Storage and Return Prosthetic Foot. COURI Summer Symposium, 2015.
- Servin, P., Starks, S., Nystrom, A., Chaparro, D. Testing and Evaluation of a New High Quality Prosthetic Solution for Trans-Femoral Amputees. COURI Summer Symposium, 2015.
- Bowen, J., Zepeda, J. Development of a Low-Cost Energy Storage and Return Carbon Fiber Prosthetic Foot. 3rd Annual LIMBS Summit, 2015.
- Castillo, V., Llausas, D., Garcia, R., Gonzalez, R.V., Nystrom, A. Low-Cost Prosthetic Hand Design Enhanced with A Locking Mechanism Via a Ratchet System. 3rd Annual LIMBS Summit, 2015.
- Chaparro, D. Development of a Low-Cost Energy Storage and Return Prosthetic Foot. UTEP Third Annual Interdisciplinary Symposium Presentation, 2015.
- Galey L. Methods for Controlling and Innervating Prosthetic Knees. UTEP Third Annual Interdisciplinary Symposium Presentation, 2015.
- Servin, P. A New Prosthetic Solution for a Trans-Femoral Amputee Testing & Evaluation. UTEP Third Annual Interdisciplinary Symposium Presentation, 2015.
- Aranda, L. Gonzalez, R.V., Nystrom, A., Robles, M., Melendez, N. Fatigue Performance Evaluation of Multiple Prosthetic Feet Used in the Developed World. COURI Summer Symposium, 2016.
- Robles, M., Aranda, L., Melendez, N., Nystrom, A., Gonzalez, R.V. Fatigue Performance Evaluation of Prosthetic Knee Component Designs for Use in the Developing World. COURI Summer Symposium, 2016.
- Melendez, N., Robles, M., Aranda, L. Low-Cost Prosthetic Ankle Attachment. COURI Summer Symposium, 2016.
- Galey, L., Nystrom, A., Gonzalez, R.V. Development of A Low-Cost and Electronically-Innervated Prosthetic Knee. 4th Annual LIMBS Summit, 2016.
- Terrazas, S., Kendall, M. A Redesigned Volume Adjustment Mechanism for Transtibial Prosthetic Sockets. 4th Annual LIMBS Summit, 2016.
- Aranda, L., Galey, L., Gonzalez, R.V. Kinematic Analysis and Hydraulic Integration of a Four-Bar Prosthetic Knee. COURI Spring Symposium, 2018, Honorable Mention in Computational, Engineering & Applied Sciences.
- Beckmann, G., Galey, L., Gonzalez, R.V. Hydraulic Integration and Optimization for the M3 Knee. COURI Summer Symposium, 2018.
- Aranda, L., Galey, L., Gonzalez, R.V. Kinematic Analysis and Hydraulic Integration of a Four-Bar Prosthetic Knee. COURI Summer Symposium, 2019.
- Beckmann, G., Galey, L., Gonzalez, R.V. Redesign of the Hydraulic System for the M3 Prosthetic Knee. COURI Spring Symposium, 2019.
- Rios, A., Galey, L., Gonzalez, R.V. Developing a Low-Cost Prosthetic Ankle for Developing Countries. COURI Spring Symposium, 2019.
- Beckmann, G., Galey, L., Gonzalez, R.V. Redesign of the Hydraulic System for the M3 Prosthetic Knee Using a Mathematical Model. COURI Spring Virtual Symposium, 2020.
- Beckmann, G., Galey, L., Gonzalez, R.V. Valve Selection for the Hydraulic Integration for the M3 Trans-Femoral Prosthetic Knee. COURI Summer Virtual Symposium, 2020.
- Rios, A., Galey, L., Gonzalez, R.V. Developing a Low-Cost Prosthetic Ankle for Developing Countries. COURI Spring Virtual Symposium, 2020.
